DC Audio 3.5K

0 Käufe
#
verfügbar
1,279.00

Beschreibung

The 3.5kw competition series amplifier is a 3,500 watt mono block. It is capable of running up to 18 volts for up to 5,100 watts. It is a linkable amp and designed to run a 1 ohm per amp or 2 ohms when strapped.It comes with a bass knob and a clipping indicator. For power inputs it will accept 0 awg for power and 0 awg for ground.

Features Voltage 3.5kw
Output Power (RMS) 4 ohm 14.4V 750Wx1
2 ohm 14.4V 1,800×1
1 ohm 14.4V 3,500Wx1
1 ohm 16V 4,000Wx1
1 ohm 18V 5,100Wx1
Input Sensitivity 6V~0.2V
Low Pass Filter Switchable
( @ 24 dB Slope) Variable Hz 35~250
Subsonic Filter Switchable
( @ 24 dB Slope) Variable Hz 10~50
Bass Boost Variable dB 0-9dB
Frequency Response Hz 15-270
Signal to Noise Ratio dB 100
Damping factor 150<
Efficiency @ 4ohm % Over 90%
THD @ 4ohms Less than 0.1%
Fuse Rating 300 Amps
Linked Fuse Rating 600 Amps
Indicator Power Yes
Protection Yes
Clip Yes
Speaker & Power terminal Mold Type Yes
Power Gauge 0Ga
Heatsink Length 21.26″ (540mm)
Heatsink Width 9.38″ (238mm)
Heatsink Height 2.35″ (59.6mm)

 


Key Features

• 1 ohm stable

• Variable low pass filter

• Variable subsonic filter

• Variable bass boost

• Wired remote control

• Clipping indicator

We recommend for installation

• 1 upgraded battery under the hood

• 1 extra battery in the rear

• Minimum of one 0 awg ran from the front battery to the rear battery

• Upgraded aftermarket alternator

• Dash mounted voltage meter

Tags

Top
Translate