Massive Audio FC6.3

 329.00 inkl. MwSt.

Nicht vorrätig

Kategorien: ,


The FZ6 200W RMS/800W peek component is built with a heavy gauge steel power coated basket that holds high-energy Y40 magnets. A laminated Mica Composite Paper Cone is surrounded with a soft butyl rubber and bonded to a 1″ high temperature KSV VC. The high powered 25mm soft silk diaphragm tweeter is cooled with Ferro Fluid for a smooth sonic timber that is controlled buy a custom competition grade 12dB Links-worth Riley crossover with tweeter attenuation settings. The UV protected low mass woven fiber cone bounces on a Cloth Nomex Spider producing 93dB sensitivity and is bonded to a surround of soft flexible Butyl rubber assuring smooth, fast, hard hitting sonic playback.

The 12dB Linksworth Riley X Over blends highs and lows together with a balance not obtained by its competition. this 3-Way Kit comes with a 3″ Dynamic Audiophile Mid-range + two large Ferro Fluid Cooled 25mm soft silk dome tweeters that come with multiple mounting options helping the FC6.3 extend its playback up to 20K with a precise balance between power handling, frequency response and speaker location.


Heavy Gauge Steel Basket with Thick Powder Coating
6.5 Inch Drivers with High-Energy Y30 Magnets
3″ Dynamic Audiophile Mid-Range Speaker
25mm Silk Diaphragm Tweeters With Ferro Fluid Cooled V.C.
Custom External 12dB Linksworth Riley Crossovers
MASSIVE Punched Logo
High Sensitivity And Accurate Sound Reproduction
Custom Designed Pole Piece for Low Distortion and Sound Quality
Two Piece Custom Paint-able Metal Grills for 6.5″
Optional 3″ grill available upon request
Rugged Construction to Withstand Harsh Mobile Environment
Woven Fiber Paper Cone With Butyl Rubber Surround
Fully Isolated Tinsel Leads to Eliminate Cross-talk
High Quality Cloth Spider with Polyester Fiber
1” High Temperature KSV Voice Coil

Tweeter: 25mm Silk Diaphragm Tweeter Ferro Fluid (Pair)
Mid-Range: 3″ Dynamic Audiophile Speaker (Pair)
Cone: Woven Fiber Paper Cone
Sensitivity: 93dB
Frequency: 50-20KHz
RMS Power: 150 Watts
Peak Power: 600 watts
Impedance: 4 Ohm
Mounting Depth: 6.5″ = 2.40″ / 3″ = 1.53″ / 25mm = 0.602″
Mounting Diameter: 6.5″ = 5.64″ / 3″ = 2.71″ / 25mm = 2.24″
Frame Diameter: 6.5″ = 6.49″ / 3″ = 3.42″ / 25mm = 2.24″