1-channel power amplifier Pride Apollo 5000W. Suitable for subwoofer up to 5000 Watts RMS.
This model will be an excellent choice in systems where 3-4 speakers are installed, for example, Pride HP / MT series, or a pair of Pride Tv.3 / Sv.3 speakers
The rated power of the Pride Appolo is 5,000 watts per 1 ohm load, at a voltage of 14.4 V and a distortion level of the output signal of 1%.
It can work both in bridge mode and in array mode (link). Without fear, it is possible to connect to a load with a resistance of 0.5 Ohms if it is a subwoofer speaker whose DC resistance of the voice coils is not lower than the indicated mark.
Range of reproduced frequencies, Hz 15 – 270
RMS rated power of 1 ohm, number of channels x W 2 x 5000
RMS rated power of 2 ohms, number of channels x W 4 x 3000
RMS rated power at 4 ohms, number of channels x W 4 x 1700
Developed and designed on the basis of Korean Circuitry with the completion of Russian engineers.
Excellent solution for powerful subwoofers and high-quality sound for many years of work.
|1 Ohm Power||5000 W|
|2 Ohm Power||3000 W|
|4 Ohm Power||1700 W|
|Frequency Response||15Hz – 270 Hz|
|Signal to Noise||85 dB|
|Efficiency @ 4ohm||Over 90%|
|Damping Factor||> 200|
|Subsonic Filter||10 Hz – 50 Hz|
|Bass Boost||0-9 dB|
|Remote Control with indication of exceeding the distortion||Included|
|Low Pass Filter||35 Hz – 250 Hz|
|Fuse Rating||450 A|